Not a Member? Signup LOGIN:        
AD CATEGORY :: Drag Racing Cars :: Pro Modified
Ad #1228455   
This ad expires in 16 days.
Recommend AdContact SellerAdd To Favorites

1970 Cuda Outlaw 10.5 car

REDUCED PRICE ....NEED TO SALE!!!

View Extra Large Photos
$50,000.00
REDUCED PRICE NEED TO SELL!!!!

This is the only 1970 Outlaw 10.5 Barracuda in the states! This car has run with Orsca and Texas KOTH, so it is a legal 10.5 car! It was on Horsepower TV last year and has been in several issues of RPM magazine.It is a Brink's Racecraft chassis, 25.2 chrome moly,double frame rail car. The car is currently set up for a blown hemi and a Bruno/Lenco combo. The car will be sold with new front end,and hood. It has dual chutes. The car is red. The car comes wired to switch panel and manual guages @ dash. The car has had a best elasped time of 4.44 @ 169 in 1/8 mile, best 60 foot of 1.12, and the car has had several high 4.40's, and low 4.50's, as well as showing the pontential to run 4.30's. The car is an absolute crowd pleaser and a must for taking out the bad boys of Outlaw 10.5 racing. The car could be sold as a roller only. I can email pictures of the car only to serious inquirers. So if you are tire kicking, please don't waste my time! I am ready to sell, and you know if are ready to buy.

1 piece billet weld front runners
2 piece billet weld magnum 15 inch Shepperd bead locks
2 piece billet Bogart 15 inch Red's bead locks(optional$2,000.00)
Lamb front brakes and master cylinder
Wilwood rear brakes
20lb Fire fox fire system
MSD7531 (optional$650.00)
KAM systems data logger (optional$3,800.00)
Dual Diest chutes
Bickel promod 84 inch wheelie bars
New Rci 5 point harness
New 16 volt Powermaster battery
Santhuff front and rear shocks
Moser aluminum third member with 3.89 gears
Spare magnesium third member with 3.60 or 3.89 gears(optional$1,800.00)
40 spline Mark williams spool and gun drilled axles
Brand new Chance 10 inch promod converter for Ford pump(optional$1,500.00)

The car will take 2 months for front end, and paint.!
I will assure the car will certify with a 25.2 sticker
Car as roller $50,000.00(without optional parts) I need to sell the car bought a promod.

Billy 254-624-1495

This item is USED

Trades NOT ACCEPTED

Item Location: BELTON, TX Get Directions

Instructions for buyer:  buyer and seller to make arrangements for delivery @ time of sell.

Send Message To Seller
This ad expires in 16 days.




Is this classified ad inappropriate?
Report it here


Seller Information

Ad posted by: cudajunkie (#12273)
RaceSpace Profile: NONE [REQUEST]
Member Since: 2003-05-12
Number of Honor Payments: 111
Average Accepted Sale Price: $104.71
Average Honor Payment: $1.05

Power Seller
Phone Number: 254-624-1495
Contact Seller
Report A Sale
OFFICIAL HONOR MEMBER

Honor Member Rating: 6





Home | Classifieds | About | Contact | Store | Advertise | Affiliate Program | Pricing Guide | FAQ | Send Link to a Friend
Raceway Media, LLC
PO Box 491, North Adams, MA 01247
Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

Execution Time: 575 ms

Buy, Sell and Trade Race Cars for Free