540 BB CHEVY SHORT BLOCK CUSTOM CRATE MOTORS

WE BELIEVE IF NO TWO CARS OR DRIVERS ARE THE SAME, THEN HOW CAN THE MOTOR YOU ARE BUYING BE THE SAME ?

AT E&R RACING WE BELIEVE IN PROVIDING YOU WITH WHAT YOU NEED, NOT JUST WHAT WE SELL, BECAUSE WE MAKE MORE MONEY IF WE BUILD 10 THE SAME WAY, WE DONT HAVE TEN OF THE SAME CUTOMERS, SO WITH THAT SAID THIS IS JUST ONE OF THE MANY COMBINATIONS THAT WE OFFER,

WE START WITH A MERLIN lll BLOCK AND HONE IT TO 4.500 WITH DECK PLATES, WE THEN EQUALL DECK IT TO PROVIDE THE COMPRESSION FIGURES WITH THE HEAD CC,S, AND GASKET THICKNESS YOU ARE GOING TO USE.

THEN HERE IS A LIST OF PARTS THAT GO INTO IT

KB HYPEREUTECTIC PISTONS WITH A FAST BURN STEP HEAD, W/118CC HEAD IT WOULD =9.5-1 COMP.

EAGLE 4.250 STROKE CAST/STEEL CRANK

EAGLE SIR I-BEAM FORGED RODS, BUSHED, AND HAVE ARP 7/16 CAP SCREW BOLTS

SPEED PRO PLASMA MOLLY FILE FIT RINGS

MICHIGAN/CLEVITE 77 ROD, MAIN AND CAM BEARINGS

BRASS FREEZE PLUGS

AFTER INSPECTION OF ALL THE PARTS WE BALANCE THE ROTATING ASSEMBLY IN HOUSE TO MAKE SURE IT IS TO OUR SPECS,THE CRANK IS THEN MICRO POLISHED AND FINAL WASHED.

ALL PARTS ARE FINAL WASHED BY HAND AND THE ASSEMBLY BEGINS.THIS IS WHERE IT GETS TIME CONSUMING!! WE NOW HAVE TO INSTALL AND TORQUE ALL THE BRGS IN PLACE AND START MEASURING OIL CLEARANCES. DEPENDING ON HOW YOU ARE GOING TO USE THE ENGINE DEPENDS ON HOW WE SET THEM.IT CAN TAKE 3 SETS OF BEARINGS OR MORE TO BUILD ONE MOTOR THE RIGHT WAY!!

NEXT WE FILE FIT THE RINGS, AGAIN DEPENDING ON HOW IT WILL BE USED,WILL DETERMINE THE RING GAP.

NOW THE SHORT BLOCK OR FOUNDATION IS STRONG AND READY FOR COMPLETION!!
THIS COMBO IS GOOD UP TO 700HP IF YOU NEED MORE CALL US AND WE CAN BUILD IT. 630-279-5464 ASK FOR JEFF I AM THE 3RD GENERATION BUILDING MOTORS.

ADD $800.00 FOR EAGLE 434O CRANK, EAGLE H-BEAM RODS AND J&E PISTONS, INTERNALLY BALANCED

This item is NEW

Trades NOT ACCEPTED

Payment options:

Item Location: VILLA PARK, IL Get Directions

This ad expires in 4 days.