| AD CATEGORY :: Drag Racing Cars :: Junior Dragster |
Ad #1199283 Posted:2008-05-06 11:41:26
This ad expired 73 days ago.
BIG CAGE JR. DRAGSTER "MUST SELL"
***BEST OFFER***
$6,500.00
Big cage Jr. Dragster for sale! Consistant, fast, reliable! It is a clean, lightweight, and dependable car.
Will sell as roller or will sell motor and clutch seperatly.
Over $11,000 invested into this car.
Car has been totally updated in the last 6 months. A new chrome moly cage has been installed to accept a taller driver. (up to 6'1") The width of the roll cage at the shoulder hoop is 19". All of the following are brand new parts added to the car in the last 3 months:
1 quart Jaz fuel cell, Don Zig coil, throttle cable, lexan windshield, front Tf-100 tires, MT manual kill switch, RCI camlock quick release harness, car totally re-wired with new switches, Blossom dual girdle, Blossom angle plates, clutch has been totally re-built with blossom parts, Blossom belt and clutch guard, new steering disconnect, new aluminum deflector plate behind seat, all fuel lines and filter, tow strap and pins, and rear light.
ENGINE: Blockzilla block 3X1.40, Weisco piston 1.40, billet alluminum JR. racing Engineering head and flywheel, billet dyno cam 121 grind cam .438 lift (cam card avaliable), billet alluminum rod, 1.37 intake valve, 1.16 exhaust valve, 3 stage powder coated header, 33mm Mikuni flat side pumper carb (alcohol)- This motor has a stock bore. It is capable of a bore up to 3x2. This car has potential for greater speeds and ET with a bigger piston. Motor has been freshened and not raced.
Chassis:
Polar clutch with spiral design face plate, Polar motor plate, Chrome Molly Chassis with red powder coat and chrome work done to certain areas. Aluminum body with: black, red, and silver paint scheme (all vinyl graphics have been removed), custom made overflow tank, New Victory racing wheels with identical matching rear wheels, Hoosier rear racing slicks (19x8x10), Digatron Comp(tack on firewall), chrome chassis shop steering wheel with grips, black diest parachute ( may need new parachute), wheel base is 148", length of car is 176", and adjustable pedals.
Includes:
Starter with new battery, spare clutch parts, many other misc. parts also.
It is a real trick piece and very well built. This car was custom built with the 2-link bar setup. You can see for yourself that this is a TOP NOTCH car. If you want to move up and go fast, this car has a lot of room for advancement. Tons of pictures. Thanks for looking!
WILL CONSIDER ALL REASONABLE OFFERS!!
Will sell as roller or will sell motor and clutch seperatly.
Over $11,000 invested into this car.
Car has been totally updated in the last 6 months. A new chrome moly cage has been installed to accept a taller driver. (up to 6'1") The width of the roll cage at the shoulder hoop is 19". All of the following are brand new parts added to the car in the last 3 months:
1 quart Jaz fuel cell, Don Zig coil, throttle cable, lexan windshield, front Tf-100 tires, MT manual kill switch, RCI camlock quick release harness, car totally re-wired with new switches, Blossom dual girdle, Blossom angle plates, clutch has been totally re-built with blossom parts, Blossom belt and clutch guard, new steering disconnect, new aluminum deflector plate behind seat, all fuel lines and filter, tow strap and pins, and rear light.
ENGINE: Blockzilla block 3X1.40, Weisco piston 1.40, billet alluminum JR. racing Engineering head and flywheel, billet dyno cam 121 grind cam .438 lift (cam card avaliable), billet alluminum rod, 1.37 intake valve, 1.16 exhaust valve, 3 stage powder coated header, 33mm Mikuni flat side pumper carb (alcohol)- This motor has a stock bore. It is capable of a bore up to 3x2. This car has potential for greater speeds and ET with a bigger piston. Motor has been freshened and not raced.
Chassis:
Polar clutch with spiral design face plate, Polar motor plate, Chrome Molly Chassis with red powder coat and chrome work done to certain areas. Aluminum body with: black, red, and silver paint scheme (all vinyl graphics have been removed), custom made overflow tank, New Victory racing wheels with identical matching rear wheels, Hoosier rear racing slicks (19x8x10), Digatron Comp(tack on firewall), chrome chassis shop steering wheel with grips, black diest parachute ( may need new parachute), wheel base is 148", length of car is 176", and adjustable pedals.
Includes:
Starter with new battery, spare clutch parts, many other misc. parts also.
It is a real trick piece and very well built. This car was custom built with the 2-link bar setup. You can see for yourself that this is a TOP NOTCH car. If you want to move up and go fast, this car has a lot of room for advancement. Tons of pictures. Thanks for looking!
WILL CONSIDER ALL REASONABLE OFFERS!!
This item is USED
Trades ACCEPTED:
Payment options:
![]() |
BANK CHECK |
Item Location: HAMPSTEAD, MD Get Directions
Instructions for buyer:
WILL CONSIDER ALL OFFERS & TRADES. LOOKING FOR NEWER BODY STYLE F-150 EXTENDED CAB FORD TRUCK.
WILL ALSO SEPARATE & SELL AS ROLLER.
MAY HELP WITH SHIPPING CLOSE TO MARYLAND
Ad posted by: btop62steve (#80065)
RaceSpace Profile: NONE [REQUEST]
Member Since: 2005-05-02
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
Phone Number: 410-746-3069
Phone Number: 410-239-8364


RESOURCE LINKS












